Я пытаюсь создать VPC с подсетями для проекта, но все же сталкиваюсь с проблемой, когда CDK, похоже, создает две подсети с одним и тем же блоком CIDR при синтезе кода в шаблон CloudFormation, хотя я использую блок CIDR только один раз для объявления подсети. Это приводит к сбою развертывания, так как блоки CIDR конфликтуют друг с другом при создании подсетей. Вот код для определения стека:
from aws_cdk import core as cdk
from aws_cdk import aws_ec2 as ec2
class CdkWorkshop3Stack(cdk.Stack):
def __init__(self, scope: cdk.Construct, construct_id: str, **kwargs) -> None:
super().__init__(scope, construct_id, **kwargs)
# The code that defines your stack goes here
# instantiate VPC with dns support and hostname enabled and cidr block at 10.0.0.0/24
vpc = ec2.Vpc(self, "vpc-cf",
cidr="10.0.0.0/24",
enable_dns_support=True,
enable_dns_hostnames=True
)
# instantiate internet gateway and attach VPC with internet gateway
igw = ec2.CfnInternetGateway(self, "igw")
igw_attach = ec2.CfnVPCGatewayAttachment(
self, "igw_attach", vpc_id=vpc.vpc_id, internet_gateway_id=igw.attr_internet_gateway_id)
# instantiate elastic IP with VPC domin
eip = ec2.CfnEIP(self, "eip", domain="VPC")
# instantiate public and private subnets and use first availability zone
pub_subnetA = ec2.Subnet(
self, "public-subnetA", availability_zone=super().availability_zones[0], cidr_block="10.0.0.0/26", vpc_id=vpc.vpc_id, map_public_ip_on_launch=True)
pub_subnetB = ec2.Subnet(
self, "public-subnetB", availability_zone=super().availability_zones[0], cidr_block="10.0.0.64/26", vpc_id=vpc.vpc_id, map_public_ip_on_launch=True)
pri_subnetA = ec2.Subnet(
self, "private-subnetA", availability_zone=super().availability_zones[0], cidr_block="10.0.0.128/26", vpc_id=vpc.vpc_id, map_public_ip_on_launch=False)
pri_subnetB = ec2.Subnet(
self, "private-subnetB", availability_zone=super().availability_zones[0], cidr_block="10.0.0.192/26", vpc_id=vpc.vpc_id, map_public_ip_on_launch=False)
# instantiate NAT gateway
nat_gateway = ec2.CfnNatGateway(
self, "nat_gateway", allocation_id=eip.attr_allocation_id, subnet_id=pub_subnetA.subnet_vpc_id)
# instantiate routing tables
pub_route_table = ec2.CfnRouteTable(
self, "pub_route_table", vpc_id=vpc.vpc_id)
pri_route_table = ec2.CfnRouteTable(
self, "pri_route_table", vpc_id=vpc.vpc_id)
# instantiate public and private routes
pub_route = ec2.CfnRoute(self, "pub_route", route_table_id=pub_route_table.attr_route_table_id,
destination_cidr_block="0.0.0.0/0", gateway_id=igw.attr_internet_gateway_id)
pri_route = ec2.CfnRoute(self, "pri_route", route_table_id=pri_route_table.attr_route_table_id,
destination_cidr_block="0.0.0.0/0", nat_gateway_id=nat_gateway.ref)
# instantiate subnet route table associations
pub_subnetA_route_table_association = ec2.CfnSubnetRouteTableAssociation(
self, "pub_subnetA_route_table_association", route_table_id=pub_route_table.attr_route_table_id, subnet_id=pub_subnetA.subnet_vpc_id)
pub_subnetB_route_table_association = ec2.CfnSubnetRouteTableAssociation(
self, "pub_subnetB_route_table_association", route_table_id=pub_route_table.attr_route_table_id, subnet_id=pub_subnetB.subnet_vpc_id)
pri_subnetA_route_table_association = ec2.CfnSubnetRouteTableAssociation(
self, "pri_subnetA_route_table_association", route_table_id=pri_route_table.attr_route_table_id, subnet_id=pri_subnetA.subnet_vpc_id)
pri_subnetB_route_table_association = ec2.CfnSubnetRouteTableAssociation(
self, "pri_subnetB_route_table_association", route_table_id=pri_route_table.attr_route_table_id, subnet_id=pri_subnetB.subnet_vpc_id)
security_group = ec2.SecurityGroup(self, "security_group", vpc=vpc)
security_group.add_ingress_rule(
ec2.Peer.ipv4("0.0.0.0/0"), ec2.Port.tcp(22))
ec2_instance = ec2.Instance(self, "EC2", instance_type=ec2.InstanceType.of(ec2.InstanceClass.BURSTABLE2, ec2.InstanceSize.MICRO), machine_image=ec2.MachineImage.latest_amazon_linux(),
key_name="RandomKeyName", security_group=security_group, vpc=vpc, vpc_subnets=pri_subnetA)
Я не знаю, как решить эту проблему, так как ясно, что он должен использовать эти блоки CIDR только один раз. Но это не так.
ПРАВКА: Теперь я включаю ссылку на вывод шаблона CloudFormation в ответ на комментарий. Я заметил, что эта проблема конфликта, похоже, возникает только с public_subnetA и private_subnetA. Я все еще не понимаю, почему это происходит.
ПРАВКА 2: Я попытался следовать предложению маафка и сократил свой код до следующего. Я хочу сохранить конфигурацию 2 общедоступной и частной подсети, но теперь я не могу подключиться к своему экземпляру EC2, несмотря на все мои попытки. Почему то, чего можно легко достичь в Terraform, так бессмысленно сложно сделать в AWS CDK, не говоря уже о Python?
from aws_cdk import core as cdk
from aws_cdk import aws_ec2 as ec2
class HelloCdkStack(cdk.Stack):
def __init__(self, scope: cdk.Construct, construct_id: str, **kwargs) -> None:
super().__init__(scope, construct_id, **kwargs)
vpc = ec2.Vpc(self, "vpc-cf",
cidr="10.0.0.0/24",
enable_dns_support=True,
enable_dns_hostnames=True,
nat_gateways=1,
max_azs=1,
subnet_configuration=[ec2.SubnetConfiguration(
name="public-subnetA",
cidr_mask=26,
subnet_type=ec2.SubnetType.PUBLIC
), ec2.SubnetConfiguration(
name="public-subnetB",
cidr_mask=26,
subnet_type=ec2.SubnetType.PUBLIC
), ec2.SubnetConfiguration(
name="private-subnetA",
cidr_mask=26,
subnet_type=ec2.SubnetType.PRIVATE
), ec2.SubnetConfiguration(
name="private-subnetB",
cidr_mask=26,
subnet_type=ec2.SubnetType.PRIVATE)]
)
ec2_instance = ec2.Instance(self, "EC2", instance_type=ec2.InstanceType.of(ec2.InstanceClass.BURSTABLE2, ec2.InstanceSize.MICRO), machine_image=ec2.MachineImage.latest_amazon_linux(
), key_name="KeyPairRandom", vpc=vpc, vpc_subnets=vpc.select_subnets(subnet_type=ec2.SubnetType.PUBLIC).subnets[0])
ec2_instance.connections.allow_from_any_ipv4(
ec2.Port.tcp(22), 'Allow inbound SSH from anywhere')